Table of Contents
Advertisement
To Edit the Motion Grids:
1.
Click the Edit Motion Grid button, the Motion Setting menu appears.
2.
Click on the image and the grid will be displayed.
3.
To set up a motion area, drag a rectangle with your mouse (from top to bottom / upper-
left to lower-right). The selected areas will be highlighted in green (see image below).
4.
To delete a motion area, drag a rectangle with your mouse (from bottom to top /
lower-right to upper-left).
5.
Follow Step 3 to set up multiple motion areas if necessary.
6.
Sets up the Sensitivity and Min Area for the motion grids.
Sensitivity: Sets up the motion sensitivity for the grids. The larger the number, the higher
the sensitivity.
Min Area: This function is designed to prevent false detections caused by small objects. If
you select 2, only the object size larger than 4-grid size can be detected.
7.
Click the Save & Back button to save the settings and then return to the Motion menu.
85
PARAGON FHD 16x4
Advertisement
Table of Contents
