Sound; Display - Panasonic Diga DMR-ES35V Operating Instructions Manual

FUNCTIONS
FUNCTIONS
Dynamic Range Compression
Setup
Bilingual Audio Selection
Tuning
DigitalAudio Output
Disc
Audio Mode for DV Input
Picture

Sound

Display

Connection
SELECT
VHS
Others
ENTER
Setup DigitalAudio Output
PCM Down Conversion
Tuning
Dolby Digital
Disc
DTS
Picture
MPEG
Sound
Display
Dolby Digital
Connection
SELECT
VHS
Bitstream
ENTER
Others
RETURN
PCM
SELECT
ENTER
RETURN
Language
Setup
On-Screen Messages
Tuning
Grey Background
Disc
FL Display
Picture
Sound
Display
Connection
SELECT
TAB
VHS
Others
To Others Setup
Off
Sound
M 1
Dynamic Range Compression
Stereo 1
On: The level of quieter passages increases and the level of louder passages
decreases. The audio can be clearly understood even when the volume is lowered.
Bilingual Audio Selection
TAB
RETURN
If you want to record programmes that are broadcast in dual-channel sound, you can
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.
Digital Audio Output
Off
Select the appropriate setting if you have connected an external unit to the
Bitstream
DIGITAL AUDIO OUT of the DVD Recorder.
Bitstream
PCM Down Conversion
PCM
Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On : The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off : The connected unit can process signals with a scan frequency of 96 kHz or 88.2
kHz. Signals are output as 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG
Bitstream
PCM : If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or
loudspeakers. Make the necessary changes depending on your audio system.
Audio Mode for DV Input
Select the audio type when copying from the DV input.
Stereo 1
English
Display
Automatic
Language
On
Bright
Select the menu language.
On-Screen Messages
RETURN
Automatic: The on-screen displays are displayed on the screen.
Grey Background
On: The grey background is displayed when there is no television reception.
FL Display
Dim: Changes the brightness of the display on the unit.
Automatic: The display goes dark during playback. It lights up again when a button is
pushed. If the unit is switched off, the display turns off.
Setting
-R -RW(V)
-R DL
: The connected unit can decode the corresponding signal.
-R
: Original sound; Stereo 2 : Voice-over,
Setting
ENTER Option
[On] [Off] (Dolby Digital Only)
DVD-V
[M 1] [M 2]
+R +RW
+R DL
[PCM Down Conversion]
[Dolby Digital] [DTS] [MPEG]
[On] [Off]
[Bitstream] [PCM]
[Stereo 1] [Stereo 2] [Mix]
-R DL -RW(V) +R
+RW
+R DL
Mix : Original sound + voice-over
Option
ENTER
[English]
[Automatic] [Off]
[On] [Off]
[Bright] [Dim] [Automatic]
DVD VHS
ENTER
ENTER
49