Panasonic Diga DMR-ES35V Operating Instructions Manual page 55

Picture and sound settings
Play
Repeat Play
Picture
Playback NR
Progressive
Transfer.
Copy NR
Sound
V.S.S.
Dialog Enhancer
Other
Position
Option Setting
[On] [Off]
Option Setting
[On] [Off]
[On] [Off]
[Progressive - On]
[Automatic]
[On]
[Off]
Option Setting
[Natural]
[Emphasis]
[Off]
[On] [Off]
Setting Setting
Option
[1 - 5]
The function is only available if the elapsed time is displayed.
CD VCD
Track All
RAM -R -R DL -RW(V) +R +R DL
Title Chapter
DVD-A MP3
Track Group Off
During playback of a playlist
PL (Playlists)
If the Video-CD has playback control, select a track in
with the number buttons.
Reduces screen interference.
Select [On] to activate full picture output.
Select the appropriate conversion method for full-picture output.
PAL output signal
[Auto] Film and video content is detected and converted appropriately.
[Video] If problems occur with the [Auto] setting.
[Film] Select Video or Film if the video content is is not displayed correct
with the Auto setting.
NTSC output signal
[Auto 1] Film and video content is detected and converted appropriately.
[Auto 2] Movies with different picture frequencies are converted
[Video] If content does not display correct with the [Auto 1] or [Auto 2]
settings.
Reduces noise during tape recording.
Only with picture input from a video cassette.
Noise reduction is activated for video input.
The input signal can be recorded unchanged.
RAM -R -RW(V) +R +R DL +RW DVD-A DVD-V
-R DL
Surround sound effect with 2 front speakers. Only with Dolby Digital with
2 or more channels. Switch off V.S.S. if this causes problems. V.S.S. does
not work with recordings in dual-channel sound.
RAM -R -R DL -RW(V) +R +R DL +RW DVD-A DVD-V
Dolby Digital, only with 3 or more channels, including a center channel.
The volume is increased so that dialogue is easier to understand.
Position of the OSD displays on the screen.
Off
+RW -RW(VR)
DVD-V
Off
Off
Only for AV1, AV2, AV3 or DV.
-RW(VR)
-RW(VR) DivX
DVD
RAM -RW(VR)
STOP mode
55