Panasonic Diga DMR-ES35V Operating Instructions Manual page 57

Panasonic operating instructions dvd recorder dmr-es35v
Hide thumbs Also See for Diga DMR-ES35V:
Table of Contents

Advertisement

If you need help
PICTURE
No picture.
There is picture interference.
Television reception worsens
when the unit is connected.
The TV picture format is not
set correctly.
The picture flickers.
No on-screen messages.
SOUND
No sound. Distorted sound.
Volume set to quiet.
It is not possible to hear the
desired sound type.
The sound cannot be set for
stereo or NICAM broadcasts.
REMOTE CONTROL
No functions.
The TV cannot be operated.
DISPLAY
The display light is weak.
"0:00" blinks on the unit display.
î Check the connection to the TV, e.g. AV1.
î The PROGRESSIVE output is activated, but the connected TV is not
progressive-capable.
!
Press and hold
STOP
5 seconds. The function is switched to half-picture (INTERLACE).
î The [TV System] setting does not match that on the disc.
!
In
STOP
mode, press and hold
than 5 seconds. This switches the unit from PAL to NTSC or vice versa.
î
Check the antenna connection and the alignment of your antenna.
You may need to use a signal amplifier.
î Check the [TV Aspect] setting in the Connection Setup menu.
î Adjust the picture. Read the operating instructions for the TV.
î Change the [On-Screen Messages] setting the Display Setup menu.
î
Check the connections.
î
If you connected an amplifier, check the input mode.
î
Switch off the V.S.S. function if it causes problems.
!
Press
AUDIO
to select the desired sound type.
!
Change the appropriate setting in the Sound Setup menu.
î The sound cannot be switched on some discs.
î
Connect external devices with audio cables even if you use a digital connection.
î
You can change the sound type when using DVD-RAM.
î
An incorrect remote control code was selected.
î
Check the batteries.
î
Point the remote control at the sensor on the unit.
î
Child protection has been activated.
î An incorrect remote control code was selected.
î Change the [FL Display] setting in the Display Setup menu.
î No time. Set the time in the Others [Clock] Setup menu.
and
PLAY
on the unit at the same time for more than
STOP
and
OPEN/CLOSE
Page
10
14
14
50
on the unit for more
50
49
13
55
49
13
49
11
6
5
6
6
6
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents