Changing Audio - Panasonic Diga DMR-E80H Operating Instructions Manual

Changing audio

DVD POWER TV
VCR Plus+ OPEN/CLOSE
1 2
4
5
7 8
CANCEL
0
SKIP
STOP
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FRAME
PROG/CHECK ADD/DLT
STATUS MARKER
POSITION
DISPLAY
MEMORY
[HDD] [RAM] [DVD-A] [DVD-V] [VCD]
You can change the audio being received or played.
Press [AUDIO].
How the type changes depends on when you press the button.
∫ While receiving MTS audio (Multi-channel Tele-
vision Sound Stereo)
[. Stereo: Main audio (stereo)
l v
l SAP:
Secondary audio program (SAP)
l v
a- Mono: Main audio (monaural)
≥If the broadcast is "Mono i SAP", audio will be monaural even if
you select Stereo mode.
≥Select "Mono" if reception is poor during a stereo broadcast.
e.g., "Stereo" is selected
"((" appears when the unit is receiving
the type of audio you selected.
[Note]
≥If you change the sound setting while recording, the recorded
sound will also change. [HDD] [RAM]
≥It will not be possible to alter the sound by pressing [AUDIO] in the
following cases:
– When the DVD drive is selected and a DVD-R is in the disc tray.
– When recording mode is XP and "LPCM" has been selected in
the Audio menu, "Audio Mode for XP Recording" ( page 45).
– When "DVD-R compatible Rec" is set to "On" ( page 44)
Select "Main" or "SAP" from "Select MTS" in the Audio menu when
recording SAP broadcasts based on the above conditions
( page 45, Audio—Select MTS).
≥If recorded in SAP mode, main audio is also recorded.
DVD TV
HDD DVD
INPUT SELECT TV/VIDEO
3
CH
6
VOLUME
9
100
SLOW/SEARCH
PAUSE PLAY/x1.3
PLAY LIST
MENU
ENTER
RETURN
CM SKIP TIME SLIP
ERASE REC
DUBBING REC MODE
AUDIO SETUP
AUDIO
No disc
CH 12
(( Stereo
∫ While playing HDD, DVD-RAM or Video CD
LR>L>R
^---------------}
≥If it is a recording of an SAP broadcast, each time you press
[AUDIO]: [HDD] [RAM]
MAIN()SAP
For your reference
You can change the audio for the full images being played with
simultaneous rec and play and Time Slip. [HDD] [RAM]
∫ While playing DVD-Audio or DVD-Video
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack lan-
guage.
Î Digital 3/2.1ch
Sound track 1 ENG
e.g., [DVD-V] English is the selected language.
[Note]
[HDD] [RAM]
You may be unable to change the audio when you have connected
the unit to an AV receiver through the DIGITAL AUDIO OUT terminal
and "Dolby Digital" is set to "Bitstream". If this occurs:
– Change "Dolby Digital" to "PCM" ( page 45), or
– Connect also with an audio cable ( page 51, [B]) and change the
input on the receiver.
DVD-RAM
PLAY
e.g., DVD-RAM
L R
"L R" is selected
39
RQT6984