Clock Settings - Panasonic Diga DMR-E80H Operating Instructions Manual

Panasonic operating instruction dvd video recorder dmr-e80h
Hide thumbs Also See for Diga DMR-E80H:
Table of Contents

Advertisement

Clock settings

Preparation
If you connect the unit through a cable TV box or DSS receiver
( page 50), tune to your local PBS station before starting auto
clock setting. Use manual clock setting if auto clock setting does not
work or if there is no local PBS channel in your area.
1
Press [SETUP] to show the menus.
2
Press [3, 4] to select "Set Up" and
press [1].
SETUP
Off Timer
Remote Control Code
Clock Settings
Channel
Auto Clock Setting
Set Up
Manual Clock Setting
Disc
Time Zone Adjust
Video
Re-initialize Setting
Audio
Display
SELECT
TV Screen
ENTER
Auto Clock Setting
3
Press [3, 4] to select "Auto Clock
Setting" and press [ENTER].
SETUP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
If you have not yet set channels, the "Auto Channel/Clock
Setting" screen appears.
4
Press [ENTER].
Auto setting starts. This can take some time, up to a few
hours in some cases. (To stop auto clock setting, press
[RETURN].) The following screen appears when setting is
complete. Press [ENTER].
SETUP
Channel
Set Up
Disc
Video
Audio
Display
[Note]
≥If the time was not set correctly, use manual clock setting or time
zone adjust.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST=GMT s5, CST=GMT s6, MST=GMTs7, PST=GMTs8,
AST=GMT s9, HST=GMTs10, For other areas: xx hr
6 hr
Set Code 1
Proceed with the
steps described
0
below.
TAB
RETURN
Auto Clock Setting
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
Please push the ENTER key.
ENTER
RETURN
Auto Clock Setting
Auto Clock Setting is complete.
4/4/2002 12:15 AM
DST............. ON
TIME ZONE.... CST
Manual Clock Setting
3
Press [3, 4] to select "Manual Clock
Setting" and press [ENTER].
SETUP
Channel
Set Up
Video
Audio
Display
TV Screen
4
Press [2, 1] to select the item you
want to change and press [3, 4] to
change the setting.
MONTH(--)DAY(----)YEAR(--)HOUR (12-hour display)
^>TIME ZONE()DST()MINUTE(J
DST (Daylight Saving Time): ON or OFF
If you select "ON", the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
TIME ZONE:
EST()CST()MST()PST()AST()HST
(s5)
(s6)
(s7)
^---------------------------------------------------------------------------------J
5
Press [ENTER].
The clock starts.
[Note]
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
Time Zone Adjust
Adjust the time zone (s1 or r1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
3
Press [3, 4] to select "Time Zone
Adjust" and press [ENTER].
SETUP
Channel
Set Up
Disc
Video
4
Press [3, 4] to select "s1", "0", or
"r1" and press [ENTER].
The "Set Up" screen (
step 2) reappears.
Manual Clock Setting
MONTH
DAY
YEAR
HOUR
MINUTE
1
2000
/
1
SAT
12
:
00
/
DST
TIME ZONE
Disc
OFF
EST
SELECT
CHANGE
ENTER
RETURN
(s8)
(s9)
(s10)
Time Zone Adjust
j1
0
i1
PM
47
RQT6984

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diga dmr-e80Dmre80hpDmr-e80hs

Table of Contents