Editing Operations During Play; Changing Audio - Panasonic DMR-E85H Operating Instructions Manual

Playing discs
Refer to the control reference on page 20.

Editing operations during play

Erase
[HDD] [RAM] [DVD-R]
Create Chapter
[HDD] [RAM]

Changing audio

Press [AUDIO].
[HDD] [RAM] [VCD]
LR>L>R
^---------------}
HDD
PLAY
e.g., "L R" is selected
L R
[Note]
You cannot change the audio type in the following cases.
≥When a DVD-R disc is in the disc tray while DVD drive is selected.
≥When the recording mode is XP and "Audio Mode for XP Recording" is set to "LPCM" (➡page 38).
≥When "DVD-R Rec for High Speed mode" is set to "On" (➡ page 37).
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by
such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.
RQT7460
22
22
1 Press [ERASE].
2 Press [2, 1] to select "Erase" and press [ENTER].
≥A title cannot be restored once it is erased. Make certain before proceeding.
≥You cannot erase while recording or transferring (dubbing).
Press [CREATE CHAPTER].
≥Press [:, 9] to skip to the start of a chapter.
≥You cannot divide while recording or transferring (dubbing).
[DVD-A] [DVD-V]
You can change the audio channel number each time you press the
buttons. This allows you to change things like the soundtrack
language (➡page 24, Soundtrack).
Î Digital 3/2.1ch
Soundtrack 1 ENG
e.g., English is selected.