Opening A Case With Jtac; Revision History - Juniper T640 Quick Start Manual

Table of Contents

T640 Core Router Quick Start

Opening a Case with JTAC

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United

States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other

trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

To verify service entitlement by product serial number, use our Serial Number Entitlement

(SNE) Tool:

https://tools.juniper.net/SerialNumberEntitlementSearch/

You can open a case with JTAC on the Web or by telephone.

Use the Case Management tool in the CSC at

Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

For international or direct-dial options in countries without toll-free numbers, visit us at

http://www.juniper.net/support/requesting-support.html

January 2015—530-062015. Revision 1. Minor updates.

April 2012—530-046044. Revision 1. Added the six-input DC power supply.

August 2011—530-036372. Revision 1. Updated the initial configuration procedure.

Corporate rebranding.

April 2010—530-035229. Revision 1. Added the four-input 240-A DC power supply, and

the three-phase delta and wye AC power supplies. Moved the grounding procedure before

the procedures to connect external devices.

December 2008—530-026108. Revision 1. Added the three-input 240-A DC power supply

2–INPUT

mode. Updated the washer type on the DC power supply, and the procedures

for the initial configuration and connecting to external devices.

April 2007—530-017647. Revision 2. Added NEBS requirements and safety statements.

Updated the DC power connection procedure.

January 2007—530-017647. Revision 1. Added EMC compliance statements. Updated

mounting hardware procedures.

March 2005—530-010960. Revision 1. Revised to change DC power information.

April 2004—Initial release.

http://www.juniper.net/cm/

Table of Contents