Care and Maintenance
Cleaning the Exit Needle
To clean the exit needle, first locate
•
the exit needle cleaning tool, which
is on the underside of the drip tray.
Remove the tool.
•
Remove the K-Cup holder by press-
•
ing on the underside of the holder.
•
Now, reassemble unit by placing the K-Cup holder back into place. Please ensure that the K-Cup
holder is in position.
•
Replace exit needle cleaning tool into its housing on the bottom of the drip tray.
•
The B1000 is now ready to use.
Revision F, February 2003
Open the brew drawer and remove
•
the K-Cup holder.
Using cleaning tool, clean the exit
•
needle, clearing any debris.
Page 11