Adjusting The Lcd Monitor - Panasonic SDR-H250EB Operating Instructions Manual

LSQT1211(PAL_ENG).book 32 ページ ２００７年２月１３日 火曜日 午後１時１４分
Setup
Display style
[Y/M/D] 2007.12.15
[M/D/Y] 12.15.2007
[D/M/Y] 15.12.2007
≥ The date and time function are driven by a
built-in lithium battery.
≥ Make sure to check the time before recording.
≥ If the time display becomes [- -], the built-in
lithium battery has run down. Use the following
steps to charge the battery. When you turn on
the power for the first time after charging, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery
to the unit, and the built-in lithium battery will
be recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the OFF/
ON switch is set to OFF, the battery is still
being recharged.)
WARNING
THE LITHIUM BATTERY IN THIS
EQUIPMENT MUST ONLY BE REPLACED
BY QUALIFIED PERSONNEL. WHEN
NECESSARY, CONTACT YOUR LOCAL
PANASONIC SUPPLIER.
32
LSQT1211
Adjusting the LCD
Screen display
monitor
Adjusting the brightness and
colour level
1
2
The bar display moves.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
≥ When the LCD monitor is rotated by 180°
≥ These settings will not affect the images
Press the MENU button, then
select [SETUP] # [LCD SET] #
[YES] and press the joystick.
Move the joystick up or down to
select the item to be adjusted.
Then, move the joystick left or
right to make the adjustment.
towards the lens, the brightness and colour
level of the LCD monitor cannot be adjusted.
actually recorded.
MENU