Configuring And Parameterizing The Cp 340; Parameterization Options - Siemens SIMATIC CP 340 User Manual

Configuring and Parameterizing the CP 340

5.1

Parameterization Options

Configuration options
You configure and parameterize the module variants of the CP 340 using STEP 7 or the
CP 340: Point-to-Point Communication, Parameter Assignment user interface.
Table 5- 1 Configuration options for the CP 340
Product
CP 340–RS 232C
CP 340–RS 232C
CP 340–20mA-TTY
CP 340–RS 422/485
CP 340-RS 232C
CP 340-20mA-TTY
CP 340-RS 422/485
* You can also use the parameter assignment user interface as of V3.0 to configure this module, although you will then
only be able to parameterize the drivers integrated into the module firmware (not the printer drivers).
** You can also use the parameter assignment user interface as of V1.0 to configure these modules, although you will then
only be able to parameterize the drivers available on the parameter assignment user interface (not the printer drivers).
*** The new functionalities (FW update and ID data (read)) are only supported as of STEP 7 V5.2.
PtP coupling and configuration of CP 340
Manual, 04/2011, A5E00369892-03
Order number
6ES7 340–1AH00–0AE0*
6ES7 340–1AH01–0AE0**
6ES7 340–1BH00–0AE0**
6ES7 340–1CH00–0AE0**
6ES7 340-1AH02-0AE0***
6ES7 340-1BH02-0AE0***
6ES7 340-1CH02-0AE0***
Configurable using the
parameter assignment user
interface
As of V1.0
As of V3.0
as of version V5.1.5
5
Under STEP 7
As of V2.1
As of V3.0
As of V5.0
93