Connecting The Camera To A Router That Does Not Support Upnp - Panasonic BL-C1A Operating Instructions Manual

2.4.2 Connecting the Camera to a Router that does not
Support UPnP™
To allow access from the Internet with a router that does not support UPnP
the procedures below.
1.
Select [Static] on the Network page.
(1) Access the camera (see page 10).
(2) Click the [Setup] tab at the top of the page.
(3) Select [Static] on the Network page.
• The Static IP Address Configuration page is displayed. Make a
note of the IP address and port number, since they are required to
enable port forwarding on the router.
(4) Click [Save] without changing the settings.
(5) Click [Restart].
2.
Enable port forwarding
Using the IP address and port number noted on step 1-(3), enable port
forwarding on the router. See the router manual for how to enable port
forwarding.
3.
Register with the DynamicDNS service.
Port Forwarding feature
The port forwarding feature is required to allow camera access from the Internet
with a router that does not support UPnP
global one. Each camera must be assigned a unique port number.
Global IP address or URL
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
Internet
Router
Note
The IP addresses shown above may differ from those offered on your home network.
"Port forwarding" may be called "Address translation", "Static IP Masquerade", "Virtual server"
*1
or "Port mapping" in other products.
on the router.
*1
*1
Port No.
Port Forwarding feature
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
192.168.0.254
192.168.0.1
[For assistance, please call: 1-800-272-7033]
. It exchanges a local IP address for a
TM
192.168.0.253:80
192.168.0.252:81
192.168.0.252
Port No. 81
Operating Instructions
, follow
TM
192.168.0.253
Port No. 80
41