Connecting The Camera To A Router That Does Not Support Upnp - Panasonic BL-C1 Operating Instructions Manual

Operating Instructions
2.3.2 Connecting the Camera to a Router that does not
Support UPnP™
To allow access from the Internet with a router that does not support UPnP
the procedures below.
1.
Select [Static] on the Network page.
(1) Access the camera (see page 15).
(2) Click the [Setup] tab at the top of the page.
(3) Select [Static] on the Network page.
• The Static IP Address Configuration page is displayed. Make a
note of the IP address and port number, since they are required to
enable port forwarding on the router.
Note
You must assign a unique IP address and a unique port number to
each camera in the LAN.
(4) Click [Save] without changing the settings.
(5) Click [Restart].
2.
Enable port forwarding
Using the IP address and port number noted on step 1-(3), enable port forwarding on
the router. See the router manual for how to enable port forwarding.
3.
Register with the DynamicDNS service.
Port Forwarding feature
The port forwarding feature is required to allow camera access from the Internet with a
router that does not support UPnP
Global IP address or URL
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
Internet
Router
Note
The IP addresses shown above may differ from those offered on your home network.
"Port forwarding" may be called "Address translation", "Static IP Masquerade", "Virtual server"
*1
or "Port mapping" in other products.
on the router.
*1
*1
TM
Port No.
Port Forwarding feature
vvv.xxx.yyy.zzz:80
vvv.xxx.yyy.zzz:81
192.168.0.254
192.168.0.1
. It exchanges a local IP address for a global one.
192.168.0.253:80
192.168.0.252:81
192.168.0.252
Port No. 81
, follow
TM
192.168.0.253
Port No. 80
42