Updating The Camera Firmware - Panasonic BL-C1A Operating Instructions Manual

6.1.6

Updating the Camera Firmware

The Update Firmware page allows you to update the camera's firmware. If new
firmware is available, install it into the camera.
Note
• Do not turn off the power during a firmware update.
• All buffered images and sensor logs on the internal memory will be
deleted after the firmware update.
• The firmware version is displayed on the Top page and the Status page.
1.
Download the new firmware from the Panasonic Network Camera support
website at http://panasonic.net/pcc/support/netwkcam/, and save it on
your PC.
2.
Click [Update Firmware] on the Maintenance page.
3.
Click [Update Firmware].
• The procedure can take up to 7 minutes for BL-C1A or 8 minutes for BL-
C20A.
• The camera restarts. Restart operation takes up to 1 minute for BL-C1A
or 90 seconds for BL-C20A.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
101