Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. BL-C1A - Network Camera
  6. Getting started

Panasonic BL-C1A Getting Started

Indoor use only
Hide thumbs Also See for BL-C1A:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual

Getting Started

Network Camera
BL-C1A
Model No.
Trademarks
•
Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•
Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Screen shots reprinted with permission from Microsoft Corporation.
•
•
All other trademarks identified herein are the property of their respective owners.
•
This software is based in part on the work of the Independent JPEG Group.
Abbreviations
•
UPnP is the abbreviation for "Universal Plug and Play".
•
"Network Camera" is called "Camera" in this manual.
"Setup CD-ROM" is called "CD-ROM" in this manual.
•
1.
Connect the camera to your router.
The PC should be connected to the router, and to the Internet, in advance.
Router
(Customer-provided)
WAN
4
Internet
Modem
Panasonic System Networks Co., Ltd. 2005
PQQX14937YA
KK0905YT2020
Indoor Use Only
3
2
1 LAN
Ethernet cable
(Straight Cat5 cable,
Customer-provided)
PC
(For setup and display)
(Customer-provided)
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the camera's features.
If you cannot complete the setup, see the Troubleshooting manual
•
Connect the Ethernet cable (customer-
provided) to the camera and the router.
Connect the AC adaptor cord to the DC In
jack.
Plug the AC adaptor into the outlet.
•
Confirm that the indicator lights green after about
1 minute.
•
When you operate the camera, the power outlet
should be near the camera and easily
accessible.
•
Use only specified Panasonic AC adaptor (Order
No.PQLV206Y).
If the indicator does not light green, see page 3
•
and 4 of Troubleshooting on the CD-ROM.
•
The camera may become warm. This is not a
malfunction.
AC adaptor
.
on the Setup CD-ROM
The indicator
lights green.

Advertisement

loading

Related Manuals for Panasonic BL-C1A

Summary of Contents for Panasonic BL-C1A

  • Page 1: Getting Started

    • When you operate the camera, the power outlet should be near the camera and easily accessible. • Use only specified Panasonic AC adaptor (Order No.PQLV206Y). Router If the indicator does not light green, see page 3 • (Customer-provided) and 4 of Troubleshooting on the CD-ROM.

  • Page 2: Set Up The Camera

    Set up the camera. Enter the user name and password, and click [Save]. Important • To avoid any possible problems, temporarily disable any firewall or antivirus software. • This procedure explains installation of the camera on the same network as your PC. •...
  • Page 3 Port Forwarding manually following the router's manual, and try Automatic Setup again. For more information about setting up a router, refer to the Panasonic Network Camera support website at http://panasonic.net/pcc/ipcam/ • If the message "Failed to register with Viewnetcam.com." is displayed, con- firm that the router is connected to the Internet.

  • Page 4: Mount The Camera

    Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG), ActiveX Controls must be installed. Follow the steps shown below to install ActiveX Controls. Click the warning displayed above the tabs, and click [Install Click [Install].