[Tv] Speaker; Audio Mode Selection (Stereo/Sap/Mono) - Panasonic TQB2A0952 Operating Instructions Manual

Speaker (Off/On) and
Audio Mode Selection
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
Highlight Desired
When
Menu is Displayed
[TV] Speaker
- This feature is used to turn the
internal speakers "ON" or "OFF", when the Receiver is
connected to an External Audio Amplifier.
1. Press the ACTION button to display the Main Menu.
2. Press the CH DOWN and VOL RIGHT buttons to
highlight the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu,
_ AUDIO
AUDIO NORM
BASS
TREBLE
BALANCE
SURROUND
SPEAKER !
AUDIO MODE
STEREO
÷
+
SAP MONO
NO
OFF
4. Press the CH UP or DOWN button to highlight
"SPEAKER".
5. Press the VOL LEFT or RIGHT button to select TV
Speakers ON or OFF.
6. Press the ACTION button twice to exit.
Audio Mode Stereo/SAP/Mono
When Audio is broadcast in Stereo or SAP an On
Screen Display will appear on initial 'q-urn On" and
"Channel Change". The available choices will be
indicated in red.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Audio Icon.
3. Press the ACTION button to display the Audio
Adjustment Menu.
_ AUDIO
AUDIO NORM NO
BASS -_
TREBLE "_
BALANCE ÷
SURROUND OFF
SPEAKER ON
STEREO SAP MONO
Helpful Hints:
STEREO - Two channel Audio reception.
SAP - Second Audio Programming (typically used for
bilingual audio).
MONO - Use when stereo signal is weak.
4. Press the CH UP or DOWN button to highlight
"AUDIO MODE".
5. Press the VOL LEFT or RIGHT button to select
Stereo, SAP (Second Audio Programming) or
Mono. The selected mode will be highlighted.
6. Press the ACTION button twice to exit.
- 21 -