Table of Contents
Advertisement
Channel Caption Feature
ACTION
Displays and Exits Menus
Channel Caption (Station Identifier)-
The
Channel Caption (Station Identifier) allows you to
input the call names of up to 30 stations into memory
(using up to 4 characters). The call name will then
display, along with the channel number when changing
channels or pressing RECALL.
..__XYYZ
CH 03
Channel Caption
(Station Identifier)
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
Highlight Desired
When
Menu is Displayed
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Channel Caption Icon.
3.
Press the ACTION button to display the Channel
Caption Menu.
_
HANNEL
CAPTION
ENTER
CAPTION I
,_
TO
MOVE
CURSOR
V&
TO
SELECT
CHANNEL
4,
Use Remote Keyboard or CH UP/DOWN buttons to
enter channel number you wish to assign a Station
Identifier. (See Helpful Hints.)
5.
Press the VOL RIGHT button to Select CAPTION
position.
6.
Press the CH UP/DOWN
button to
select first
character in Station Identifier, press VOL RIGHT
button to move to second position and repeat until
the complete Station Identifier is entered (up to 4
characters).
Helpful Hints:
To select the desired channels for the Station Identifier
feature press two digits on the Remote Keyboard (Ex-
ample press 0, then 5 for channel 05). If cable channel
over 100 is desired press three required digits on Re-
mote Keyboard.
- 30 -
_
HANNEL
CAPTION
ENTER
I CHANNEL IN_ONI
# 3
I_ _] H li_i_l
<lib TO
MOVE
CURSOR
V&
TO SELECT
CHARACTER
7.
Press the VOL RIGHT button repeatedly to select
channel number position. Repeat steps 4 through 7
to continue adding Channel Station Identifier.
8.
Press the ACTION button twice to exit.
Advertisement
Table of Contents
