Table of Contents
Advertisement
Control Operation
(cont.)
TV/Video
Button
- Press the TVNIDEO button
to select desired input,
TV/VIDEO
Signal coming from:
REAR VIDEO/AUDIO
INPUT 1 TERMIN_
VIDEO
Recall Button
-
Press the RECALL button to
review:
Audio Mode status
@ CH number or Video Input selected
_) Sleep Timer status
(_ Clock time
(_) Channel Caption (Station Identifier)
RECALL
29
®
CH 03
XYYZ
(_
1:00
@
Cable Power Button - TheCABLE POWER
button on the Remote Control has been designed to
operate selected brands of Cable Television Converter
boxes. The proper
cable television converter box
infrared code must be obtained prior to use. (Please
refer to Programming
the
Universal
Remote
for
programming
instructions.)
The
Remote
Control
TV/CABLE switch should be in the CABLE position.
NOTE:The
CHANNEL
UP/DOWN
buttons
on the
Remote
may
be used
for selecting
Cable
Converter box channels.
CABLE
POWER
Located On Remote Control
Use
to select
Cable
Box
>-" Channels after programming
InfraredCode.
Multi Button
The MULTI button can be programmed to operate up
to six (6) Remote function
buttons at the same time.
For Example: TV Power/On, VCR Power/On (selected
brands) can be operated at the same time with one press
of the MULTI button.
Procedure
1.
First program the Remote for the selected VCR
Infrared access code. Confirm
that the Remote
Control is compatible with the equipment.
2.
Face the Remote Control transmitter away from all
equipment remote sensors.
3.
Press and hold down the Remote TV Power button,
then press and hold down the MULTI button at the
sametime. Release buttons (All previouscommands
will be erased.)
(TV)
POWER
MULTI
PRESS SIMULTANEOUSLY
4.
Press a maximum of six (6) function buttons on the
Remote.
Each button you press is equal to one function. If six
(6) Remote button functions
are entered, all will
register
in the
MULTI
button
memory
in the
sequence
entered. When less than six Remote
button functions
are entered,
press the MULTI
button to end the program mode. ONaiting more than
30 seconds without pressing another button will also
end the program mode.)
The following is an example of Remote functions
that can be programmed
into the MULTI button.
-
TV Power-
For turning TV ON and OFF.
-
VCR Power -For
turning
VCR ON and OFF
(selected
brands after programming
its Infrared
access code, if necessary).
Both can be turned ON or OFF with one press of the
MULTI button.
(TV)
POWER
VCR POWER
MULTI
To delete entered functions - Repeat step 3. Now
you can enter from one to six different Remote
functions.
NOTE:You
can also program
the MULTI button to
perform most individual Remote Control button
functions. Buttons which continuously perform a
function as long as pressed (Volume Up/Down,
Channel Up/Down, etc.) cannot be programmed.
Only those buttons which perform a function
when initially pressed
(Power
On/Off, Mute,
Direct Channel Entry, etc.) can be programmed.
-11 -
Advertisement
Table of Contents
