Table of Contents
Advertisement
Mode (TV/Ant or Cable)
ACTION
Displays and Exits Menus
Located On Remote Control
Selects or Adjusts
Features When
Menu is Displayed
Highlight Desired
When
Menu is Displayed
TV/Ant or Cable Tuning Mode
IMPORTANT NOTE: The proper input mode must be
selected to match the type of signal at the antenna
input (TV or Cable).
• TV is used when the Receiver is not connected to a
Cable TV System, for example, when using a VHF/
UHF antenna (Channels 02-69).
• CABLE is used when the Receiver is connected to a
Cable TV System and you are not using a cable
company converter box (Channels 01-125).
NOTE: Some Cable TV Systems encode (scramble)
program material on specific channels. A cable
company supplied decoder is required to
reproduce an acceptable picture. Certain Cable
TV Systems offset some channels to reduce
interference.
It will be necessary to use the
cable company supplied converter to receive
these specific channels.
1.
Press the ACTION button to display the Main Menu.
2.
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set Up Icon.
3.
Press the ACTION button to display the Set Up
Menu.
SET UP
SET TIME
8_
AUTO PROGRAM
NNNO I
MANUAL PROGRAM
4.
Press the CH UP or DOWN button to highlight
"MODE".
5.
Press the VOL LEFT or RIGHT button to select TV/
ANT (mode) or CABLE (mode).
6.
Press the ACTION button twice to exit.
- 35 -
Advertisement
Table of Contents
