Connecting Through A Kv-L20R/V (Kv-1000-Series Unit) - Omron NV3Q Connection Manual

Connecting through a KV-L20R/V (KV-1000-series Unit)

8-5

Connecting through a KV-L20R/V (KV-1000-series Unit)

PLC Model Selection
Applicable Devices
Bit/word devices
Bit devices Relays
Control relays
Timers
Counters
High-speed counter compara-
tors
Word devices Data memory
Controller memory
Temporary data memory
Double-word devices Digital trimmers
Timer present values
Counter present values
High-speed counter present
values
Timer preset values
Counter preset values
High-speed counter compara-
tor preset values
Communications Settings
62
Select Keyence KV1000 Series.
00000 to 59915
CR 0000 to CR 3915
T 000 to T 511
C 000 to C 511
CTC 0 to CTC 3
DM 00000 to DM 39999
CM 0000 to CM 3999
TM 000 to TM 511
AT 0 to AT 7
T/TC 000 to T/TC 511
C/CC 000 to C/CC 511
CTH 0 to CTH 1
T/TS 000 to T/TS 511
C/CS 000 to C/CS 511
CTC 0 to CTC 3
The following communications settings are recommended for the PT and
PLC.
■
PT Communications Settings (Set from the NV-Designer using the NV
Configuration.)
Item
Baud rate
Data bits
Stop bits
Parity
■
KV-L20R Settings
Item
Operating mode
Baud rate
RS/CS flow control
Note Use the Unit Editor included with the KV Builder to set the KV-
L20R/V.
No.
9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps, or 115,200 bps
8
1
Even
KV mode (host link)
9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps, or 115,200 bps
None
Section 8-5
Comments
Outputting to high-speed
counter comparators is not
possible.
Setting
Setting