Konica Minolta bizhub C3100P User Manual page 32

2.2 Replacing consumables
6
Lower the Transfer Belt Unit guide.
7
Hold the handles at the right and left, then carefully pull out the Transfer Belt Unit.
% Pull out the Transfer Belt Unit horizontally. Not doing so may damage the surface.
% After pulling out the Transfer Belt Unit halfway, draw out it while holding the handles on the right
and left sides.
8
Take a new Transfer Belt Unit out of the package box.
% Do not touch the surface of the Transfer Belt Unit. Also, do not remove the blue lever.
[Maintenance/Troubleshooting]
2
2-19