Display Grouping & Control - Raymarine ST70+ Operating Manual

2
Applicability: The procedures on this card apply to all configurations of ST70+ Instruments and Pilot Controllers.
Your ST70+ displays can be configured to operate in groups. The ST70+ commissioning
instructions describe how to set up groups and allocate keypads. Refer to the ST70+ User
Reference Manual or the ST70+ Installation Guide.
Group parameters
Each group:
• Can contain up to four displays of the same type i.e. EITHER Instrument OR Pilot Con-
troller. You cannot mix Instruments and Pilot Controllers in the same group.
• Can be controlled by one or more keypads of the appropriate type.
Selecting displays
In any display group, you can control one display at a time.
To select the display you want to control, use the
in the group. The 'selected' display screen is highlighted.
Each time you press the Select Display button, the next display in the group is selected.
Depth Speed
6 7
.0 .0
FT KTS
Lat Lon
o
o
47 67
N
Heading
o
63
MAG
Time
11:23
24H
ST70+ general information
Display grouping & control
(Select Display) button on any keypad
Selected display
Depth Speed Heading
o
6 7 63
.0 .0
FT KTS MAG
Lat Lon Time
o
o
o
47 67
11:23
24H
N
Depth Speed Heading
o
6 7 63
.0 .0
FT KTS MAG
Lat Lon Time
o
o
47 67
11:23
24H
N
D11020-1
Depth Speed Heading
o
6 7 63
.0 .0
FT KTS MAG
Lat Lon Time
o
o
47 67
11:23
24H
N