Executing Calibration Using The Image Controller - Konica Minolta bizhub PRESS C1100 Quick Manual

5.2 Image Quality Adjustment

Executing calibration using the image controller

This guide describes how to carry out calibration for daily maintenance using Color Centro and a colorimeter (FD-
5BT).
In addition, "Exact Color" or "G7 Calibration", which enables higher accuracy adjustment are available. For details,
refer to the HTML User's Guide.
A
Connect a colorimeter to the computer.
Example: Connect the FD-5BT here.
B
Start Color Centro.
For information about how to start Color Centro, refer to page 3-12.
C
Click [Calibration].
D
Check that [Start Calibration] is
enabled.
If it appears dimmed, the color density control
is set to Enable. Change [Use Color Density
Control] to [OFF]. For information about the
setting procedure, refer to page 5-23.
5-28