Post Inserter (Folding Unit Fd-503) - Konica Minolta bizhub PRESS C1100 Quick Manual

Specifications
Paper size
Storage capacity

)Post Inserter (Folding Unit FD-503)

You can load paper into the upper and lower trays of Folding Unit FD-503 and feed paper to an output-related optional
device. On the control panel of the post inserter, you can configure the punch or fold function for paper to be fed
from the lower tray. For details, refer to the HTML User's Guide.
Paper tray
1: Upper tray
2: Lower tray
Specifications
Paper weight
Paper size
Storage capacity
• SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w,
13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5
w/v, 8K w, 16K w/v, Foolscap*
• Tab Paper: A4T v, 8.5 e 11T v
• Custom: Width 100 mm to 330.2 mm, Length 139.7 mm to 487.7 mm / Width
3.94" to 13", Length 5.5" to 19.2"
JIS standard sizes are used for B series in the factory setting. For JIS/ISO switch-
ing, contact your service representative.
You can change the detectable standard size. Also, you can select [ON] from [K
Size] on the Utility/Counter screen to detect the K size. For details, refer to the
HTML User's Guide.
If the paper width is less than 139.7 mm / 5.5", use the small size guides. For de-
tails, refer to the HTML User's Guide.
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, 8 e 13 w.
Tray 1 (upper tray), Tray 2 (middle tray): 1390 sheets (80 g/m
Tray 3 (lower tray): 1850 sheets (80 g/m
1
2
2 2
50 g/m to 300 g/m / 13 lb Bond to 81 lb Bond
SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 v,
•
13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v,
5.5 e 8.5 v, 8K w, 16K w/v, Foolscap*
Tab Paper: A4T v, 8.5 e 11T v
•
• Custom: Width 182 mm to 331 mm, Length 139 mm to 483 mm / Width 7.17"
to 13.03", Length 5.47" to 19.02"
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w.
2
500 sheets (80 g/m / 21 lb Bond) for each
bizhub PRESS C1100/C1085
2
/ 21 lb Bond)
2
/ 21 lb Bond)
7
7-14