Power-Saving Function - Konica Minolta bizhub PRESS C1100 Quick Manual

)Power-saving function

Using the following functions can reduce the power consumption of this machine and provide greater power-saving
effects.
Function
Power Save func- Auto Low Power
tion
Auto Shut OFF
Auto Wake-up
Cond. (Displayed
only when the Im-
age Controller IC-
602 is installed.)
ErP Setting
Weekly Timer
Description
Turns off the touch panel display to reduce the power consumption
of this machine. This machine is placed into the Auto Low Power
mode when:
• The specified period of time has elapsed with no print jobs exe-
cuted in the printable state
• Power Save on the control panel has been pressed for a sec-
ond or more
This mode is available when [Auto Low Power] is selected by select-
ing Utility/Counter - [Administrator Setting] - [System Setting] -
[Power Save Setting] - [Power Save Function Setting].
There are eight power-saving time periods available: 5 min., 10 min.,
15 min., 30 min., 60 min., 90 min., 120 min. and 240 min., from which
you can select the desired one.
Turns off all LEDs except Power Save LED and Power LED on the
control panel, to reduce the power consumption of this machine.
This machine is placed into the Auto Shut OFF mode when:
• The specified period of time has elapsed with no print jobs exe-
cuted in the printable state
• Power Save on the control panel has been pressed for a sec-
ond or more
If the Auto Shut OFF mode is kept for a long time, it may take a while
to warm up this machine upon restart.
This mode is available when [Auto Shut OFF] is selected by selecting
Utility/Counter - [Administrator Setting] - [System Setting] - [Power
Save Setting] - [Power Save Function Setting].
There are seven power-saving time periods available: 0 min., 1 min.,
30 min., 60 min., 90 min., 120 min. and 240 min., from which you can
select the desired one.
Specifies whether to automatically release the Auto Shut OFF mode
for all print jobs or for only some print jobs. When print jobs are re-
ceived in the Auto Shut OFF mode, the Auto Shut OFF mode is au-
tomatically released according to this setting and the jobs are
printed.
If you press [All Jobs] to highlight the button, the Shut OFF mode is
automatically released even during Auto Shut OFF, and all print jobs
can be output.
If the button highlight display is released, during Auto Shut OFF, the
Shut OFF mode is automatically released and print jobs can be out-
put only when they are received from [PS Plug-in driver] or [Page-
Scope Direct Print]. To process other jobs, use this machine after
releasing the Shut OFF mode.
Turns the main power off after the Auto Low Power mode, Auto Shut
OFF mode, or the sub power switch is kept in the off state for the
specified period of time.
There are seven power-saving time periods available: Do Not
Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours and 72
Hours, from which you can select the desired one.
If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap-
pears dimmed and you will not be able to configure this setting.
Automatically turns the power of this machine on or off based on the
specified time or day of the week.
bizhub PRESS C1100/C1085
1-3
1