Konica Minolta bizhub PRESS C1100 Quick Manual page 68

5.2 Image Quality Adjustment
Daily adjustment flow (High)
In addition to "Daily Adjustment Flow (Standard)", carry out adjustments in the following cases, in particular:
-
Immediately before an image, in which the hue is important, is output
- When the color stability is insufficient (when enhancing the reproducibility)
-
When the paper type is different
Order Menu item
With Color Centro
and colorimeter
STEP 1 [Gamma Automatic
Adj.]
(Refer to the HTML
User's Guide.)
STEP 2 [Maximum Density
Adjustment]
(Refer to the HTML
User's Guide.)
STEP 3 Calibration
(page 5-28)
STEP 4 -
NOTICE
To use [Each Paper Type Color Adj.] in [Color Density Control], execute [Each Paper Type Color Adj.] to configure tray
settings before this procedure. For details, refer to the HTML User's Guide.
5-20
Description
With Relay Unit
RU-511
[Color Density Con- [Gamma Automatic Adj.]:
trol] Automatically adjusts the color reproducibility of
(Refer to the right- all the output paper.
hand section.)
[Color Density Control]:
•
•
[Gamma Automatic [Maximum Density Adjustment]:
Adj.] Enhances the density reproducibility.
(Refer to the HTML
User's Guide.) [Gamma Automatic Adj.]:
Automatically adjusts the color reproducibility of
all the output paper.
[Maximum Density Calibration:
Auto Adjustment Calibrates the color reproducibility that fluctuates
(RU)] (page 5-21) or from day to day.
[Maximum Density
Adjustment] [Maximum Density Auto Adjustment (RU)] or
(Refer to the HTML [Maximum Density Adjustment]:
User's Guide.) Enhances the density reproducibility. Select
whether to make adjustments automatically or
manually.
[Color Density Con- [Color Density Control]:
trol] (page 5-26) Execute [Color Density Manual Control].
Check that [Periodical Adj. Execution] is set to
[ON] in [Color Density Control] - [Basic Set-
ting].
Also, check the setting of [Color Density] for
the tray to be used. To check the setting sta-
tus, press [Paper Setting] on the [MACHINE]
screen, select the tray to be specified, then
select [Changer Set] - [Color Density].
To use standard paper, set [Default Adj. Data].
When you use special paper or you want to
enhance the accuracy of auto adjustment, we
recommend that you set [Each Paper Type
Color Adj.]. For details, refer to the HTML Us-
er's Guide.