Installing The Mbcl Meter Bridge (Option) - Yamaha CL5 Owner's Manual

Installing the
MBCL meter
bridge (option)
1.
On the back of the CL3/CL1 console's touch
screen, loosen screws 'A' (three locations) so
that they are backed-out approximately
4 mm.
The CL3 has screws ' A ' in two locations. Choose one
or the other location as appropriate for your situation.
A
2.
Hook holes 'B' of the MBCL mounting strap
onto screws 'A' of the CL3/CL1.
A
A
4 mm
CL3 console
A
B
CL3 console

Installing the MBCL meter bridge (option)

3.
Tighten screws 'A' to secure the MBCL,
starting with the upper two screws.
4.
Connect the MBCL connector 'C' to the
METER port 'D' on the CL3/CL1, and fasten
the locking screws.
A
NOTICE
Make sure that the console and the PW800W are
powered-off before you connect the MBCL meter bridge to
the console. Failure to observe this will cause malfunction
or electric shock.
A
C
D
CL3 console
Owner's Manual
55