Meter Bridge - Yamaha PM 5000 Owner's Manual

Meter Bridge

The PM5000 meter bridge features precise bar-graph meters that display the signal levels at the master
outs (stereo aux, group/aux, stereo, mono), matrix outs (stereo, mono), cue (L/C/R), and the talkback/
oscillator bus, from –39 dB to PEAK level in 3-dB increments.
1
LAMP OUT METER
DIMMER LED DIMMER
SOLO
MODE
PW
CAUTION PANEL
PREVIEW
LED DIMMER
FAN LAMP OFF
CAUTION
SOLO SELECT
STEREO GROUP/ ST·
AUX AUX MONO(C) MATRIX
STEREO AUX
STEREO MATRIX
The meters are switched to display the stereo aux or stereo matrix signals, or the group/aux or mono matrix
signals. The [METER SELECT] switch in the console's monitor control section alternately selects aux or
matrix monitoring for both of these meters at once. The CUE C meter is automatically switched to display
the talkback/oscillator signal level when either the [OSC ON] or talkback [ON] switch is engaged (the TB/
OSC LED at the bottom of the meter will light).
N OT E
Since there are only four stereo matrices, meters 5 ~ 12 are not active when the meters are switched to stereo matrix level
display.
2 3 4 5 6 7
1
L R
STEREO AUX
STEREO MATRIX
8 9 10 11 12
STEREO MONO(C)
L R C
2
L R
Monitor Control Section
1 2 3 4 5 6 7
CUE
GROUP/AUX
MATRIX
CUE
L R C
PEAK PEAK
+12 +12
+6 +6
0 0
-6 -6
-12 -12
-18 -18
-24 -24
-30 -30
-39 -39
TB/OSC
8
47