Table of Contents
Advertisement
TG2421AL_2422AL(e).book Page 40 Tuesday, March 15, 2005 6:29 PM
Useful Information
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
Display message
Busy
Error!!
---Incomplete---
Phonebook full
No link to base.
Move closer to
base, try again.
Phonebook full
No items stored
Please lift up
and try again.
System is busy.
Please try again
later.
Dial locked
*1 KX-TG2422AL only
40
Cause & solution
L The called handset is in use.
L The handset you tried to copy phonebook items to is in
*1
use.
L The handset you are calling is too far from the base unit.
L When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the handset
and the base unit away from the electrical appliances and
try again.
L The other handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 22).
L The entered password was wrong in programming dial
lock. Enter the correct password.
L When the phonebook item(s) was(were) sent to another
handset, the handset's phonebook memory was full and
copying stopped. Press {OFF} to exit. Erase items from
the other handset's phonebook (page 21). When
phonebook memory is available, you can copy all
phonebook items (page 23) or individual items one by one
*1
(page 22).
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit's AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset's registration may have been cancelled. Re-
register the handset (page 34).
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 21).
L Your phonebook or redial list is empty.
L A handset button was pressed while the handset was on
the base unit or charger. Lift the handset and press the
button again.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
L More than one unit is in use. Try again later.
L Dial lock is turned on. To turn it off, see page 34.
*1
*1
*1
*1
Advertisement
Table of Contents
