Table of Contents
Advertisement
TG2421AL_2422AL(e).book Page 11 Tuesday, March 15, 2005 6:29 PM
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
L The unit will beep once, the CHARGE
indicator will light, and "Charging" will
be displayed.
L "Charge completed" is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Base unit
CHARGE indicator
Charger (KX-TG2422AL only)
CHARGE
indicator
Note:
L To ensure the battery charges properly,
clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean more
often if the unit is subject to grease, dust,
or high humidity.
Battery strength
You can confirm the battery strength on the
handset display.
Battery icon
Battery strength
Fully charged
5
Medium
6
Low
7
When flashing: needs
to be recharged.
Discharged
8
Recharging the battery
Recharge the battery when:
– "Recharge battery" is displayed or
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
L Recharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.
L If the battery has been discharged, the
handset will display "Charge for 6h"
and 8 when you place the handset
on the base unit or charger.
Preparation
11
Advertisement
Table of Contents
