Jeep 2014 Wrangler Owner's Manual page 59

4. Position the lap belt across your thighs, below your
abdomen. To remove slack in the lap belt portion, pull
up on the shoulder belt. To loosen the lap belt if it is
too tight, tilt the latch plate and pull on the lap belt. A
snug belt reduces the risk of sliding under the belt in
a collision.
NOTE: The Seat Belt Reminder Light will remain on
until the driver and front passenger (if equipped with
front passenger BeltAlert®) seat belt is buckled. For
further information, refer to "Enhanced Seat Belt Use
Reminder System (BeltAlert®)".
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57
Removing Slack From Belt
2