Jeep 2014 Wrangler Owner's Manual page 100

98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
What is the weight limit (child's
weight + weight of the child re-
straint) for using the Tether Anchor
with the seat belt to attach a for-
ward facing child restraint?
Can the rear-facing child restraint
touch the back of the front passen-
ger seat?
Can the head restraints be re-
moved?
Can the buckle stalk be twisted to
tighten the seat belt against the belt
path of the child restraint?
Weight limit of the Child Restraint
Yes
Yes (2-Door Model only)
Yes
Always use the tether anchor when
using the seat belt to install a for-
ward facing child restraint, up to
the recommended weight limit of
the child restraint.
Contact between the front passen-
ger seat and the child restraint is
allowed, if the child restraint
manufacturer also allows contact.
Head restraints cannot be removed
in the 4-Door model.
In positions with cinching latch
plates (CINCH), the buckle stalk
may be twisted up to 3 full turns.
Do not twist the buckle stalk in a
seating position with an ALR re-
tractor.