Jeep 2014 Wrangler Owner's Manual page 628

626 MAINTAINING YOUR VEHICLE
Cavity
M37
M38
CAUTION!
• When installing the Integrated Power Module
cover, it is important to ensure the cover is properly
positioned and fully latched. Failure to do so may
allow water to get into the Integrated Power Mod-
ule, and possibly result in an electrical system
failure.
Cartridge Fuse
–
–
(Continued)
Mini Fuse
10 Amp Red Anti-Lock Brake System, Electronic Stabil-
ity Control, Stop Lamp Switch, Fuel Pump
25 Amp Clear
CAUTION! (Continued)
• When replacing a blown fuse, it is important to use
only a fuse having the correct amperage rating. The
use of a fuse with a rating other than indicated may
result in a dangerous electrical system overload. If
a properly rated fuse continues to blow, it indicates
a problem in the circuit that must be corrected.
Description
Relay
Lock/Unlock Motors