Seat Belts In Passenger Seating Positions - Jeep 2014 Wrangler Owner's Manual

Hide thumbs Also See for 2014 Wrangler:

Table of Contents

Position the shoulder belt height adjusters so that the

belt rests across the middle of your shoulder. Failure

to adjust the safety belt properly could reduce the

effectiveness of the seat belt and increase the risk of

injury in a collision.

As a guide, if you are shorter than average, you will

prefer a lower position, and if you are taller than average,

you will prefer a higher position. When you release the

anchorage, try to move it up or down to make sure that

it is locked in position.

Seat Belts In Passenger Seating Positions

The seat belts in the passenger seating positions are

equipped with Automatic Locking Retractors (ALR)

which are used to secure a child restraint system. For

additional information, refer to "Installing Child Re-

straints Using The Vehicle Seat Belt" under the "Child

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61

Restraints" section. The chart below defines the type of

feature for each seating position.

• N/A — Not Applicable

• ALR — Automatic Locking Retractor

If the passenger seating position is equipped with an

ALR and is being used for normal usage:

Only pull the belt webbing out far enough to comfortably

wrap around the occupant's mid-section so as to not

Table of Contents