Installing The Soft Top - Four-Door Models - Jeep 2014 Wrangler Owner's Manual

202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Installing The Soft Top — Four-Door Models
NOTE: The following procedures are for first time set up
only. For future soft top procedures, refer to "Soft Top" in
this section.
1. Locate and remove the following items prior to hard
top removal:
• Right and left door frames
• Six door frame attachment knobs
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom Top™ Three-
Piece Modular Hard Top — Front/Rear Panel Re-
moval" in this section.
3. Install the door frames. Refer to "Door Frame" in this
section.
4. Install the soft top with the pivot brackets above the
sport bar brackets, lower the soft top into the sport bar
bracket slots in a downward motion to lock tab on soft
top. You will need to lift the top to get the brackets to
line up. (Another person may be needed to help with
this operation.)
NOTE: If you are doing this alone, use one arm to hold
the soft top up, the other to align the brackets.