Selecting The Handset Ringer Volume/Pattern - Panasonic KX-TCD951EB Operating Instructions Manual

Settings

Selecting the Handset Ringer Volume/Pattern

You can program the desired handset ringer volume and pattern.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
Ringer volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1
Press
PROG
F iU
G
2
Press or
3
Press
OK
The current volume is displayed and rings.
Ex. Level 3 is selected.
G
4
Press or
level.
Each time you press a button, the selected
volume is displayed and rings.
To set to OFF, erase "
until "
5
Press
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
When set to OFF, "
displayed.
14
.
F
until " F22 " is displayed.
.
F
to select the desired
" by pressing
" is displayed.
.
" will be
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
1
Press
2
Press
3
Press
The current ringer pattern is displayed and
rings.
Ex. Pattern 1 is selected.
F23U
4
Press
pattern.
You can press
pattern.
Each time you press a button, the selected
pattern will be displayed and sound.
G
5
Press
A confirmation tone sounds and the
display will return to the stand-by mode.
.
PROG
G F
until " F23 " is displayed.
or
.
OK
i
G F
or to select the desired
1 to 6
.
PROG
to select the