Selecting The Handset Ringer Volume/Pattern - Panasonic KX-TCD953EB Operating Instructions Manual

Selecting the Handset Ringer Volume/Pattern

You can program the desired handset ringer volume and pattern.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
Ringer volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1
Press .
PROG
F iU
G F
2
Press or until " F22 " is displayed.
3
Press OK .
The current volume is displayed and rings.
Ex. Level 3 is selected.
G F
4
Press or to select the desired
level.
Each time you press a button, the selected
volume is displayed and rings.
To set to OFF, erase "
until " " is displayed.
5
Press .
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
When set to OFF, "
displayed.
G
" by pressing
" will be
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
1
Press .
PROG
G F
2
until " F23 " is displayed.
Press or
3
Press .
OK
The current ringer pattern is displayed and
rings.
Ex. Pattern 1 is selected.
F23U i
G F
4
Press or to select the desired
pattern.
1
You can press
pattern.
Each time you press a button, the selected
pattern will be displayed and sound.
5
Press PROG .
A confirmation tone sounds and the
display will return to the stand-by mode.
to 6 to select the
15