Table of Contents
Advertisement
30401 English KX-TCD700NL
Getting Started
Connections
Plug in the AC Adaptor and the telephone line cord to the rear of the unit. Then
connect the cord as shown.
Fasten the AC adaptor cord
Fasten the AC adaptor cord
to prevent it from being
to prevent it from being
disconnected
disconnected
USE ONLY WITH Panasonic AC ADAPTOR PQLV1CE.
• Be careful not to confuse the telephone line jack with the AC adaptor jack on
the base unit. If connected improperly, the base unit will not work and damage
may occur.
• The AC Adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
• If your unit is connected to a telephone line or PBX which does not support
Caller ID services, you cannot access those services.
• The unit will not work during a power failure. We recommend you connect a
standard telephone on the same line for power protection.
25/4/01
2:31 pm
Hook
Page 6
Telephone Line Cord
To Single-Line Telephone Jack
AC Adaptor
6
To Power Outlet
(AC 230V, 50Hz)
Advertisement
Table of Contents
