Table of Contents
Advertisement
30401 English KX-TCD700NL
Paging/Intercom
Transferring a Call using the Intercom
3. (Handset 2) When the unit rings,
4. (Handset 1) Transferring a call
• The transfer is completed
or
to return to the External Call
Transferring a Call without the Intercom
This feature enables you to transfer the call to another handset without waiting
for the paged handset to answer.
Eg. Handset 1 is transferring a call to Handset 2.
1. (Handset 1)
During a call,
• The call is put on hold.
2. (Handset 1)
• You will hear an internal ring back tone until the other
handset is answered.
3. (Handset 1)
4. (Handset 2) When the unit rings,
• The transfer is completed.
• If the paged handset is not answered within 30 seconds, a ring tone
sounds at the paging handset. The paging handset can return to the call by
pressing
Conference
During a call using the handset, you can make an intercom call to another
handset and then combine the calls together to establish a conference call
between handsets registered to the same base unit.
1. (Handset 1) During a call,
number eg.
• The call is put on hold.
• If there is no answer,
2. (Handset 2) When the unit rings,
3. (Handset 1)
4. (Handset 1 or 2)
25/4/01
2:32 pm
(Intercom icon turns on).
desired handset no. eg.
.
.
.
to return to the call.
to establish a conference call.
to hang up on conference call.
Page 24
(continued)
or
to answer.
.
to answer.
then enter the desired handset
or
to answer.
24
Advertisement
Table of Contents
