Table of Contents
Advertisement
700al
australian 2 5 02
Installing the Batteries in the Handset
• If the rechargeable
batteries are not
inserted correctly,
the handset will not
work.
Battery Charge
At the time of shipment, the batteries
are not charged. To charge, place the
handset on the base unit. Please charge the batteries for approximately 10 hours
before initial use. During charging, the battery icon is as shown above.
Battery Strength
You can check the present battery strength on the display.
Battery strength
Battery icon
Recharge
When "Û" flashes or the unit beeps every 15 seconds, recharge the batteries.
Battery Information
After your batteries are fully charged:
Operation
While in use (Talk)
While not in use (Stand-By)
• Battery life may vary depending on usage conditions, such as:
– when viewing the Caller ID Caller List, and
– ambient temperature.
• Clean the handset charge contacts with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust or high humidity.
Otherwise the batteries may not charge properly.
• To maximise battery life, it is advisable not to place the handset on the base
unit until "Û" flashes.
• The batteries cannot be overcharged.
2/5/02
3:00 pm
Fully charged
Medium
Ò
Ú
Ni-MH battery life (Included)
Approx. 20 hours
Approx. 160 hours
7
Page 7
Full
Flashing
Low
Û
Ni-Cd battery life (optional)
Approx. 12 hours (based on 800mA per hour)
Approx. 100 hours
➡
Low
No power
Û
(Flashing)
Advertisement
Table of Contents
