PROGRAMMING YOUR APPARATUS
Programming Your Apparatus
Your facsimile apparatus has a variety of adjustable Fax Parameter Settings. These parameter settings,
listed in the Parameter Table (See page 81), are preset for you and do not need to be changed. If you want
to make a change, read the table carefully. Some parameters, such as the Resolution, can be temporarily
changed by a simple key operation just before a transmission is made. When the transmission ends
however, these parameters return to their preset values (Home position). Parameters can be changed by
the procedure described below.
1
FUNCTION/
EDIT
or
or
2
COPY/
SET
3
Ex: Choose [SILENT RCV] in the BASIC SETTING.
4
COPY/
SET
5
6
COPY/
SET
To set another parameter, repeat operation from step 3, or to
return to standby, press [STOP].
(See note1)
NOTE
80
Setting Fax Parameters
FUNCTION/
EDIT
FUNCTION/
EDIT
repeatedly until your request is displayed.
ON or OFF is available to select.
1. To print a Fax Parameter List, see page 84.
BASIC SETTING ?
or
FAX SETTING ?
or
TAM SETTING ?
DATE & TIME ?
SILENT RCV ?
:OFF
:ON
RING COUNTER ?