Panasonic UF-E1 User Manual page 13

Connecting the Telephone Line Cord, and Power Cord,
Printer Interface Cable
Notice to Users in U.K.
This apparatus must be properly earthed through an ordinary 13A AC mains plug and socket.
If a 13A socket is not provided a qualified electrician should be consulted to ensure suitable connection and
earthing is provided.
The telephone line is supplied at Telecommunication Network Voltage (TNV).
WARNING FOR FLEXIBLE CORD
If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed
and the plug has to be cut off and disposed of safely. There is a danger of several electrical shock if the
cutoff plug is inserted into a live socket outlet. If a new plug is fitted, please observe the wiring code as
below. If in any doubt please consult a qualified electrician. Use a fuse that is approved by ASTA or BSI to
BS1362. Always replace the fuse cover and never use the plug with the fuse cover omitted.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code.
Green or Green & Yellow = Earth. Blue = Neutral. Brown = Live.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug. Proceed as follows. The wire which is coloured green or
green & yellow must be connected to the terminal in the plug which is marked with the letter E or by the
earth symbol or coloured green & yellow. The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black or blue. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured red or brown.
13