To Disconnect Usb Cable Safely - Panasonic HDC-TM10 Operating Instructions Manual

∫ If the driver has not been
recognised properly
Use the following methods to enable it to be
recognised.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.

∫ To disconnect USB cable safely

1 Double click the
tray displayed on the PC.
≥ Depending on your PC's settings, this icon
may not be displayed.
2 Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-SD10/SD USB
Device] is selected and click [OK].
Verify [MATSHITA HDC-TM10/SD USB
Device] or [MATSHITA HDC-TM10/MEM
USB Device] is selected and click [OK].
( ) icon in task
111
VQT2D32