Connecting To A Pc - Panasonic HDC-TM10 Operating Instructions Manual

With a PC
2
Setup
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
≥ It is possible to use it connected to the PC with
the batteries only.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
≥ Insert the USB connectors as far as they will
go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
≥ The Smart wizard screen is automatically
displayed when HD Writer AE 1.5 is installed.
≥ This unit is automatically recognised as an
external drive of the PC. (l 112)
110
VQT2D32

Connecting to a PC

≥ When you select an option other than [PC],
≥ When the unit is connected to a PC its
≥ Do not disconnect the USB cable or the AC
≥
reconnect the USB cable.
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or Built-in
memory access icon (
screen.
) appears on the unit