To Disconnect Usb Cable Safely (Except For Nv-Gs37/27); If You No Longer Need Software Or Driver (Uninstall) (Except For Nv-Gs27) - Panasonic NVGS500 Operating Instructions Manual

1
2
3
1
16
VQT0T20
To disconnect USB cable safely
(except for NV-GS37/27)
If USB cable is disconnected while computer is on, error dialogue
may appear. In such case click [OK] and close the dialogue box. By
following the steps below you can disconnect the cable safely.
1
Double click the
≥Hardware disconnect dialogue appears.
2
Select [USB Mass Storage Device] and click [Stop].
3
Verify [Matshita DVC USB Device] is selected and
click [OK].
≥Click [OK], and you can safely disconnect the cable.
Note on the driver name displayed
The driver name displayed will differ depending on your OS,
operating environment and the mode of the movie camera.
≥Windows XP/2000:
≥Windows Me:
≥Make sure movie camera's function light is off and disconnect the
cable. Please also read the movie camera's operating instructions.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you no longer need software or driver
(Uninstall) (except for NV-GS27)
The screens may vary with the type of the OS. (In this manual,
explanation is offered with Windows XP screen.)
1
Select [start] (>> [Settings]) >> [Control Panel], select
the software or the driver from [Add/Remove
Programs] to uninstall.
≥Uninstalling steps may vary depending on the OS. Please refer to
the user manual of your OS.
icon in task tray.
The name is displayed as [USB Mass
Storage Device] or [Matshita DVC USB
Device] in PC connection mode.
The name is displayed as [USB Disk] or
[Matshita DVC] in PC connection mode.