To Disconnect Usb Cable Safely - Panasonic HC-VX870 Owner's Manual

∫ To disconnect USB cable safely

WX970
Select the icon in task tray displayed on the PC, and then click [HC-WX970].
VX870
Select the icon in task tray displayed on the PC, and then click [HC-VX870].
V770
Select the icon in task tray displayed on the PC, and then click [HC-V770].
≥ Depending on your PC's settings, this icon may not be displayed.
About the screen indication of the unit
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, disconnect
the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card.)
∫ Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥ When connecting this unit to a PC for the first time, make sure to connect this unit to the
PC with this unit turned on.
≥ Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the
way.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ You cannot charge the battery by connecting the supplied DC cable.
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥ During charging, the status indicator flashes.
≥ You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (l
≥ It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 231.
12)
- 213 -