Tone Timings; Ringing Tone; Tone Frequencies - Panasonic KX-HDV130 Administrator's Manual

Value Range
Default Value
Configuration File Reference

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.6.5.3 Ringing Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Document Version 2015-12
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "480,620", the unit will use a mixed
signal of a 480 Hz tone and a 620 Hz tone.
425,0
BUSY_TONE_FRQ (Page 285)
Specifies the pattern, in milliseconds, of busy tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,330,270
BUSY_TONE_TIMING (Page 286)
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "440,480", the unit will use a mixed
signal of a 440 Hz tone and a 480 Hz tone.
425,0
RINGBACK_TONE_FRQ (Page 287)
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
4.6.5 Tone Settings
Administrator Guide 149