4.4.2.1 User Password
Current Password
Description
Value Range
Default Value
New Password
Description
Value Range
Default Value
Configuration File Reference
Confirm New Password
Description
Value Range
Default Value
4.4.3 Admin Password Settings
This screen allows you to change the password used to authenticate the Administrator account when logging
in to the Web user interface.
Note
•
For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
•
After you change the administrator password, the next time you access the Web user interface, the
authentication dialog box appears. Three consecutive login failures will result in an error ("401
Document Version 2015-12
Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =, >, ?,
[, ], ^, `, {, |, }, ~, \ and space)
Not stored.
Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =, >, ?,
[, ], ^, `, {, |, }, ~, \ and space)
Note
•
A hyphen (-) cannot be used as the first character.
Not stored.
Note
•
When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Initial
User Password Settings] screen is displayed automatically to
make the user set a password.
USER_PASS (Page 198)
Specifies the same password that you entered in [New Password] for
confirmation.
6–64 characters (except !, ", #, $, %, &, ', (, ), @, *, +, ,, /, :, ;, <, =, >, ?,
[, ], ^, `, {, |, }, ~, \ and space)
Not stored.
4.4.3 Admin Password Settings
Administrator Guide
109