Buick 2009 Enclave Owner's Manual page 218

3-100 Instrument Panel
Listing All Paired and Connected
Phones
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "List". The system lists all
the paired Bluetooth devices.
If a phone is connected to
the vehicle, the system will
say "Is connected" after the
connected phone.
Deleting a Paired Phone
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Delete". The system asks
which phone to delete followed
by a tone.
for
4. Say the name of the phone
to be deleted. If the phone name
is unknown, use the "List"
command for a list of all paired
phones. The system responds
with "Would you like to delete
<phone name>? Yes or No"
followed by a tone.
5. Say "Yes" to delete the phone.
The system responds with
"OK, deleting <phone name>".
Linking to a Different Phone
1. Press and hold
two seconds. The system
for
responds with "Ready"
followed by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Change phone". The
Storing Name Tags
The system can store up to thirty
phone numbers as name tags
that are shared between the
Bluetooth and OnStar systems.
b g
for
The system uses the following
commands to store and retrieve
phone numbers:
•
•
•
system responds with "Please
wait while I search for other
phones".
•
If another phone is found,
the response will be "<Phone
name> is now connected".
•
If another phone is not found,
the original phone remains
connected.
Store
Digit Store
Directory