Amana AGC6356KFW User Instructions page 8

Flame too high
■
or too low
■
Excessive heat around
■
cookware on cooktop
■
■
Cooking results are not
■
what was expected
■
■
8
Ensure the cooktop gas supply is correct (LP or Natural gas). These cooktops come from the
factory set for Natural gas.
Refer to the Installation Instructions to verify that the pressure regulator is installed correctly
and the line pressure and the gas line pressure are correct.
Be sure the cookware is approximately the same size as the cooking area and surface burner.
Cookware should not extend more than
Adjust the flame so that it does not wrap around the cookware.
Be sure the proper cookware is being used. Refer to the "Cookware" section.
Check the heat level. Refer to "Excessive heat around the cookware on cooktop" in this section.
Check that the cooktop is level. Refer to the Installation Instructions.
/ " (13 mm) outside the cooking area.
1
2